The purpose of a chiller is to remove heat from a liquid via a vapor-compression or absorption refrigeration cycle. The evaporator and the condenser are essential parts in a vapor-compression cycle. SWEP offers highly efficient evaporators and condenser with dedicated ranges for R410A, R134a, and R407C. These ranges have been thoroughly tested and verified in our in-house laboratory.
Our AsyMatrix® plate pattern concept enables an asymmetric channel configuration. AsyMatrix® for evaporators and condenser results in high thermal performance, lower pressure drop on the water side and a reduced refrigerant charge. All contributing to more environmentally friendly air conditioning solutions.
In addition to evaporators and condensers, SWEP offer a wide range of other heat exchanger solutions for vapor-compression chillers:
- Economizers
- Heat recovery (de-superheaters)
- Internal heat exchangers
- Oil coolers
- Sub-coolers
An absorption chiller uses a heat source to generate the energy needed to drive the refrigeration cycle. SWEP BPHEs enable tight temperature approaches on the low- and/or high-temperature stream thereby increasing system performance.
관련 제품

DB300
당사의 AsyMatrix®특허 기술을 갖춘 DB300은 고성능에 낮은 수압 강하를 결합한 비대칭의 응축기입니다. DB300은 매우 효과적이고 진정한 이중의 다목적 응축기이며, 냉동기 및 히트 펌프 응용분야용으로 완벽한 선택입니다. DB300의 장점은 전체 및 절반정도의 부분 부하에서도 전체 성능을 제공할 수 있습니다.

DB400
DB400은 매우 효과적이고 진정한 이중의 다목적 응축기이며, 유연한 냉각장치 및 기후 조절 응용분야용으로 완벽한 선택입니다. DB400의 장점은 전체 및 절반정도의 부분 부하에서도 전체 성능을 제공할 수 있습니다.

B30
B30은 비대칭형이며, 유체가 대각으로 흐르는 열 교환기입니다. B30은 가스-액체 분야 및 주류로부터 흐르는 지류 유동에 대해 특히 적합합니다. 2½″ 배관으로 물의 유량, 최고 58 m³/h (255 gpm)까지 적용할 수 있습니다. 냉동기의 흡입 가스 열 교환기로서 최고 350kW, 공기 압축기의 압축 공기 냉각기로서 최고 175kW 그리고 엔진을 위한 엔진 충전 공기 냉각기로서 1MW 이상 사용될 수 있습니다. B30은 정격 하중 및 반복 하중 둘다에서 정상 BPHE 설계보다 더 우수한 견고성을 제공하도록 설계되었습니다.